You can not keep your pole away from impurities such as brown mucus, cloudy water, algae, etc. Over time, access to many contaminants in the surface of the pool and make it look bad and shabby. A good cleaning is necessary so that the pin will be clean and full of life. In order to address specific pollutants and mold, it is necessary to protect against certain chemicals like algal pol clarifier to fetch water and chlorine pool shock. Keep your pins to keep things clean and hygienic isenvironment. But to see a dirty pool not only bad form, but you do not feel comfortable swimming in it and some can cause skin problems as well.
Items needed
- Algae protect
- Chlorine
- Chlorine Dispenser
- Garden Hose
- Tube
- Pol brush
- Pol-Filter
- Pol-tube
- Pol pump
- Shock Pole
- Pol Skimmer
- Pol-test strips
- Water Clarifier
Directions
1 If you have a roof over the pool, take it awaycarefully.
2 Take the skimmer and remove all visible dirt and grime from the surface of the pool. This will ensure that your pool filter is not clogged it. First of all the debris flying from the top, then brush the bottom of the pool.
3 Wash before use pool filter, clean water. Use garden hose and water on the filter to remove dirt. Enjoy the filter with water.
4 Install the filter swimming pool pump in the tank properly. Connecting the hubfilter and pump with the pool and switch on the pump to let the pool water flow through filter.
5. It is better to clean the bottom of the pool in sections. This will help you to work properly on the entire bottom of the pool. ool brush and hose are the best choices to clean the bottom of the pool. You may find some marks hard to remove but some might be permanent.
6. Keep an eye on the pool filter as well through out your cleaning session. You may need to clean filter 2-3 times while cleaning the pool as it become full of water and debris.
Each time you remove the filter wash it properly with water. Later re-install it properly and resume your work.
7. Once you are done with cleaning, now is the time to add algae guard, pool shock and water clarifier in your pool to keep it clean and free from algae and bacteria for longer period of time.
8. Take the shock powder and put the required amount of it on edges of the pool. If required mix it with the help of pool brush to scatter it in the water evenly.
9. Now take the water clarifier and add it to pool in the same way you applied shock powder. Mix it well with the help of pool brush.
10. Take algae guard and add it in the same way as you did the shock powder and the water clarifier. Examine for some time and make sure that all of the three has properly mixed into the pol water and nothing is settled at the bottom.
11. Let the pump working on the pool water. Take the hose and brush out of the pool and cover up (solar blanket or anything suitable) the surface of the pool to keep it free from pollutants.
12. Next morning, take the cover off from pool surface. Take a chemical test strip and immerse it into the pool water and keep it there unshaken for sometime. Soon you will see the color of the strip changes. Compare the color with the color levels given on the chemical test strip container.
This color will help you to know whether you need more quantity of chemicals in the pool or not. If it is required to add more chemicals, add them. The chemical levels in the pool must be stable and in balance with pH and alkalinity levels.
13. Each day you have to start with Step 12. Then back to Step 6. You need to end with Step 11. This process will go on till you find your pool water clear and hygienic. The process will go on for few days depending upon the condition of your pool.
14. You need to check the strip test on daily basis and be sure that the chemical levels should remain stable and in line with the recommended specifications.
15. In the end you need to fix the chlorine dispenser in the pool. Keep it full with chlorine and this will provide the necessary chlorine level require keeping the pool water clean. Double the quantity of chlorine in the summer season and high usage sessions.
0 comments:
Post a Comment